Home > Sxth Element SS Braided Fuel Line Install
fuel line install

Sxth Element SS Braided Fuel Line Install

In this video we go over the Sxth Element SS Braided Fuel line. The steps described below will aid you to installing all the different fuel lines on the market for the 1.6T. The customers car used for this install bought the Sxth Element SS Braided Fuel Line. We must say this is a high quality Fuel Line! We here at Kdm Tuners have installed the Fuel Line kits from all the supporting vendors. The Sxth Element line and fittings are hands down the easiest to deal with. With the crimped style hose ends and milled fittings, Its hard to imagine this Fuel Line would fail like others have.

The install will take a couple hours to complete with minimal tools. Messing with fuel can be a daunting task, but is relatively easy install. The install steps should be about the same from vehicle to vehicle.

Vehicles include:

  • Veloster Turbo
  • Elantra Gt
  • Elantra Sport
  • Kona Turbo
  • Soul
  • Forte Koup

Here is a Link to the written Install Instructions provided by Sxth Element:

Sxth Element Install Written Install Guide

Purchase here


 Features of the Sxth Element SS Braided Fuel Line


Making sure your engine has enough fuel and consistent fuel delivery to safely make power is very important. Hyundai has issued a Technical Service Bulletin for the Low Pressure Fuel Feed Line for the Hyundai Veloster Turbo. This shares VERY similar parts to the Kia Forte SX Turbo. This fuel feed line happens to be one of those parts. The bulletin states the fuel line fails under load causing fuel starvation which makes the car hesitate and lose power.

We HIGHLY recommend replacing this line when modifying your car with performance enhancing parts. It is better to be safe than sorry.

Switching to a high flow fuel hose will slightly increase the audible noise of the high pressure fuel pump.  We have observed this increase in noise with the radio off at idle, and with deceleration in gear. When you are driving, road noise and/or the radio will drown out the extra pump noise easily. The added noise will not hurt anything so not to worry!

Sxth Element replaced the factory low pressure feed line with a -6AN Stainless braided PTFE hose with black aluminum fittings. There new line will not kink under pressure like the factory fuel line, so you get consistent fuel delivery.


Sxth Element line is 100% compatible with all unleaded gasolines and E85 fuels.







These lines are finished with custom SAE fittings that install cleanly with the factory high pressure fuel pump and low pressure fuel pump housing. Sxth Elements fittings WILL NEVER pop off like other fittings out there.




**If you would like more info on The Sxth Element Fuel Lines please feel free to contact us. You can also find these for purchase here in our E-Store or by clicking here**

Leave a Comment

Shopping Cart